Mo Redrawing Wire
For the coiling of W incandescent filaments Mo core wires are used as mandrels. Support wires are required for the fastening of the filament inside the lamp. PLANSEE supplies the respective molybdenum redrawing wires.
Advantages:
- Good drawability down to very small diameters
- High ring weights
- No formation of coarse grain during stabilization annealing
Forms of delivery:
- Wire with graphite-coated surface and stress relieving heat treatment on SD300K or K250 spools, with diameters from 0.4 to 3.2 mm; (standard Ø 1.0 and 2.6 mm)
ML Conducting Current and Lead-in Wires/Pins
 |
ML pins for lead-in are required for halogen lamps in hard glass technology. ML conducting pins, which are welded with the MY-ESS-ribbon, are applied for halogen and high-pressure discharge lamps made of quartz glass. |
Advantages:
- High ductility after sealing
- Crack free, electro-polished surface, crimped connections guarantees vacuum tight seals
- Very good weldability
- High recrystallization temperature
- Good corrosion resistance
Versions:
- Wire: electropolished surface diameters from 0.3 to 1 mm (standard dimensions ex stock via PLANSEE EXPRESS)
- Pins: cut, scramped and/or bent according to customer drawings, or as welded ML/Ni or ML/steel combi pin
Forms of delivery:
- Finished parts: cleaned, annealed, ready to install or processing; packed in labelled heat sealed polythene bags with desiccant
- Semi-finished products: wire on standard spools SD300K or SH253K
