Annealing and sintering boats.

You wouldn't trust your annealing and sintering boats to any old container, would you? Of course not. Because we only supply top-quality sintering and annealing boats. With our molybdenum, tantalum, niobium, tungsten and a wide range of alloys, we have the right material for your high-temperature process. We use these materials to manufacture sintering and annealing boats for continuous and batch furnaces.

Sheet for the production of annealing and sintering boats
Sheet for the production of annealing and sintering boats

Our boats offer outstanding dimensional stability and corrosion resistance coupled with excellent creep resistance and structural stability. The benefit to you? A particularly long service life with barely any distortion. And thanks to the smoothness of their surfaces and the use of special Alumina and Zirconia coatings, we can guarantee that nothing will adhere to our boats.

Annealing and sintering boats

We can adapt the design of our annealing and sintering boats to your specific requirements. Our products are available riveted, deep-drawn or folded. Do you have very special requirements regarding the dimensional stability of our annealing and sintering boats? Then we recommend that you choose ML and TZM.


By using suitable alloys and optimized production processes, we are able to improve the properties of molybdenum. To achieve a particularly high level of ductility and creep resistance, we dope pure molybdenum with small quantities of La2O3. The stabilized microstructure and modified recrystallization behavior prevent the premature embrittlement and fracture of our furnace components.

What makes ML better than pure molybdenum?

  • Higher recrystallization temperature
  • Elongated grain structure for improved ductility
  • Greater creep resistance

Whenever materials have to meet special challenges, we add titanium and zirconium to strengthen the microstructure of pure molybdenum. Mo-Ti solid solution and Ti-Zr carbides ensure that optimum strengths are achieved at temperatures up to 1 400 °C (2552 °F).

What can TZM do better than pure molybdenum?

  • Better creep resistance
  • Higher recrystallization temperature
  • Greater thermal stability

We're here.

It makes no difference whether you need an entire hot zone or simply a spare part for your existing furnace. With Plansee, you are in good hands. We are happy to install your products for you at your premises. And, of course, we are there to lend a hand when it comes to inspecting, maintaining and optimizing existing furnaces.

A single source for all your needs.

We handle every stage in the manufacture of our products in-house. From the raw materials through to the finished product: including the development of new materials. In this way, we can guarantee that you benefit from the very best quality.

We compress our metal powders and powder mixes at pressures of up to 2 t/cm² (tonnes per square centimetre) to form a so-called green compact. When end products with particularly demanding geometries are required, we make sure as ear
treatment /

More products for high-temperature processes.

Whether for annealing furnaces and soldering processes, coating systems, MIM furnaces, sintering furnaces, HIP processes or for growing single crystals: Whenever things get hot, we're here for you with our molybdenum, tungsten, tantalum and niobium.

Find out more about our intrepid products for your systems. Is your product not yet on the list? That's not a problem. We'll be happy to find a tailor-made solution for you.

Plansee Onlineshop

Why wait? Our ribbons, sheets, rods and wires manufactured from refractory metals are available for order online right now. Take a look:

Your contact person
Your contact Person for:
Mike Ferullo
Give me a call:
+1 508 918 1276
or send an Email:
Mike Ferullo