Pulvimetalurgia - el invitado de honor en Reutte.
¿Pueden las capas metálicas conseguir unas imágenes de televisión aún más nítidas? ¿Cómo puede contribuir la metalurgia a la producción económica de pilas de combustible? ¿Y cómo mantiene el molibdeno la cabeza fría, incluso cuando se utiliza en LEDs de alto rendimiento? Cuando los mundos de la investigación y la industria se encuentran en Reutte, el tema principal es el papel de la pulvimetalurgia en las tecnologías del futuro.
Cada cuatro años desde 1952, el Grupo Plansee concova a invitados a la conferencia sectorial más grande del mundo sobre la producción pulvimetalúrgica de materiales de alto rendimiento – el Seminario Plansee.
Participantes de 35 países.
Aproximadamente 500 investigadores y usuarios están presentes cuando las personalidades más importantes del ámbito de la pulvimetalúrgia presentan sus resultados de investigación hasta el momento inéditos. Estaremos encantados de darle la bienvenida como invitado con ocasión del próximo Seminario Plansee. Le esperan presentaciones científicas de alto nivel, un programa marco lleno de eventos estimulantes y la oportunidad de discutir los desarrollos tecnológicos con sus compañeros del sector. Hasta entonces, puede ir ambientándose echando un vistazo a la galería fotográfica del pasado Plansee Seminar 2017.
Impresiones del Seminario de Plansee 2017
¿Quiere saber más?
Visite www.plansee-seminar.com. ¡O simplemente contáctenos!. Andreas Pilz le atenderá con mucho gusto: mailto:andreas.pilz@plansee.com
Algunas muestras de lo que le espera. Eche un vistazo.
Numerosos investigadores renombrados presentan sus trabajos, asegurando así el éxito de un encuentro científico a la vanguardia de la tecnología. Naturalmente, también nuestros empleados contribuyen a la discusión con sus últimos resultados de investigación. Aquí le presentamos algunos de nuestros ponentes en los tres últimos Seminarios Plansee:
2017.
- Molybdenum and tungsten in sapphire crystal growth industry
- Carbon doping - A key for the substitute of thoriated tungsten
- Fundamental analysis of the influence of powder characteristics in selective laser melting of molybdenum based on a multi-physical simulation model
- Molybdenum-copper-composites for the advanced thermal management of modern electronics
- Numerical simulation of the entire production route of refractory metals from powder to a sintered metal part
- CFDEM modelling of particle heating and acceleration in cold spraying
- A method for measuring the high temperature emissivity of refractory metal surfaces
- Non-destructive measurement of the tungsten content in the binder phase of tungsten heavy alloys
- Rotary friction welding of molybdenum components
- The impact of reduction conditions on molybdenum morphology
- Ti-Al-N/Mo-Si-B multilayers: An architectural design for high temperature oxidation resistant hard coatings
2013.
- Long term behavior and new applications for Sibor®coating (oxidation protection for molybdenum)
- New design solutions for thermal insulation systems for high-temperature furnaces
- Optimization of the surface structure of heating filaments with regard to their apparent thermal emissivity
- Microstructural features of switched Cu-Cr surface melt layers
- Electromechanical corrosion of molybdenum electrodes in soda-lime glass containing antimony
- Corrosion of molybdenum in cooling water
- Studying target erosion in sputtering magnetrons using a discrete numerical model
- Tungsten heavy alloys for collimators and shieldings in the x-ray diagnostics
- Substitution of thoria additions by lanthanum-oxide doping in electrodes for atmospheric plasma spraying
- Thermal stability and oxidation resistance of TiAlN_TaAlN multilayer coatings
2009.
- Fracture Toughness of Polycrystalline Tungsten Alloys
- Influence of Cross Rolling and Heat Treatment on Texture and Forming Properties of Molybdenum Sheets
- Influence of Processing on the Microstructure and Mechanical Properties of Mo-Si-B Alloys
- Investigation of Solid Solution Hardening in Molybdenum Alloys
- Joining of Refractory Metals and its Application
- Near Net Shape Manufacturing of CuCr Vacuum Switching Contacts without Prototyping
- Numerical and Experimental Fracture Mechanics Based Optimization of the Crack Resistance of Carbon / Carbon to Copper Interfaces
- On the Recrystallization Behavior of Technically Pure Molybdenum
- Oxidation of Sputtered Thin Films of Molybdenum Alloys at Ambient Conditions
- PM Processing of ODS Cr- and FeCr-based alloys for Solid Oxide Fuel Cell Applications
- Process Control by Means of Non Destructive Ultrasonic Testing of Complex WCu Contact Components for Energy Transmission and Distribution
- The Corrosion Behaviour of Refractory Metals against Molten and Evaporated Zinc
2005.
- Development of a Low Temperature Solid HIP Process for Joining CFC Monoblocks onto CuCrZr Tubes
- Microstructure and Mechanical Properties of Si and Y doped Tantalum
- Niobium as Mint Metal: Production - Properties - Processing
- Non Destructive Testing along the Manufacture of High Heat Flux Components for the Nuclear Fusion Experiment Wendelstein 7-X
- Numerical Simulation of Manufacturing Routes for Nuclear Fusion Divertor Components
- PM Processing of ODS Cr- and FeCr-based alloys for Solid Oxide Fuel Cell Applications
- Properties of the SIBOR® Oxidation Protective Coating on Refractory Metal Alloys
- WCAg Contact Materials with Improved Homogeneity